Dinamap Pro 100V2 Wartungshandbuch PDF herunterladen (Seite 34)

2-12 PRO 100-400 V2 Patient Monitor Service Manual Revision A

2009829-001

Product Description: SECTION 2. PRODUCT DESCRIPTION

2.6. SPECIFICATIONS

This product conforms to the essential requirements of

the Medical Device Directive. Accessories without the CE

Mark are not guaranteed to meet the Essential

requirements of the Medical Device Directive.

IPX1 The PRO Series Monitor is protected against vertically falling

drops of water and conforms to the IEC 529 standard at level of IPX1.

Vertically falling drops of water shall have no harmful effects to the

Monitor.

2.6.1. Power Requirements

Mains Protection against electrical shock - Class 1

AC Input

Voltage

115/230 VAC, 50/60 Hz (nominal),

90~253 VAC, 47~63 Hz (range)

Alternate Sources Protection against electrical shock - Class 1

DC Input Voltage 18-24 VDC, 30 VA from supplied power convertor

External DC Input Fuse Internal, Auto-resetting

Battery 12-volt, 2.3 amp-hours. Protected by auto-resetting fuse.

Minimum operation time: 2 hours (5 minute auto cycle with

adult cuff at 25°C (77°F) from full charge. Time for full

recharge: 1hr 50 min from full discharge when the Monitor is

switched off and 8 hrs when the Monitor is switched on.

2.6.2. Environmental

Operating Temperature +5° C to +40° C (+41° F to + 104° F)

Operating Atmospheric Pressure 700hPa to 1060 hPa

Storage Temperature -20° C to +50° C (-4° F to + 122° F)

Storage/Transportation Atmospheric Pressure 500 hPa to 1060 hPa

Humidity Range 0% to 95%, noncondensing

Radio Frequency Complies with IEC Publication 601-1-2 (April 1993) Medical

Electrical Equipment, Electromagnetic Compatibility

Requirements and Tests and CISPR 11 (Group 1, Class A)

for radiated and conducted emissions.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 103 104

Keine Kommentare

Dinamap Pro 100V2 Wartungshandbuch Seite 34